How am I going to master the stock market...

[Robert H 455]

If I can't even use a tape measure correctly!

I spent the day installing a wall mount for a 29" ultrawide monitor which will be orientated in portrait mode. I calculated 46 cm above the desk as the centered height, but for some reason went to measure 41 cm on the wall. I quadruple-checked the 41 cm before drilling and off we went.

Monitor goes on the mount and... it's too low by exactly 5 cm. Going to redo tomorrow 🤣

[GordonDK 6]

Well, I have wall-mounted 3 of my 6 monitors, and I probably drilled around 50 holes in the wall before I got it right (whereas 6 would have been sufficient, if I had done it right in the first place...). Probably why we have decided to give the stock market a go, eh? 🙂

[Aiman 86]

Well, still look good enough. xD, I'm about to receive the stands, table and screen next week, I'm already worried about those holes on the wall... 

[Brendon 146]

"For some reason" 

might want to 'invest' in

 https://www.walmart.com/ip/Homax-Nail-Hole-Patch-Sapckle-White-5-3-oz/17300366?wmlspartner=wlpa&selectedSellerId=0&wl13=2598&adid=22222222227016744417&wl0=&wl1=g&wl2=c&wl3=80432605969&wl4=pla-177672085249&wl5=9032543&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=local&wl12=17300366&wl13=2598&veh=sem

[Robert H 455]

Home Improvement: whiteboard installed on first attempt! Thanks @Carlos M. for the idea and inspiration!

[Yuanzhi 8]

Nice setup Robert!

[Robert H 455]

Got another monitor to balance out the setup. Not perfectly aligned, but I can live with it.

 

[JohnG 0]

Robert,  that looks great, I'm curious, what screen resolution are your monitors?  1680x1200?     etc?

[Robert H 455]

@JohnG The middle monitors are 3440x1440 and the sides are 2560x1080.

[Jan R 4]

Great setup Robert! Four monitors without graphics card (only HD630 graphics)? How does this work?

[Robert H 455]

@Jan R I've since upgraded PC's to the ASRock DeskMini GTX 1060. It supports 4 displays whereas my old DeskMini 110 was limited to 2 displays.