Robert H 453 Posted June 18, 2018 If I can't even use a tape measure correctly! I spent the day installing a wall mount for a 29" ultrawide monitor which will be orientated in portrait mode. I calculated 46 cm above the desk as the centered height, but for some reason went to measure 41 cm on the wall. I quadruple-checked the 41 cm before drilling and off we went. Monitor goes on the mount and... it's too low by exactly 5 cm. Going to redo tomorrow 1 Share this post Link to post Share on other sites
GordonDK 6 Posted June 18, 2018 Well, I have wall-mounted 3 of my 6 monitors, and I probably drilled around 50 holes in the wall before I got it right (whereas 6 would have been sufficient, if I had done it right in the first place...). Probably why we have decided to give the stock market a go, eh? 2 Share this post Link to post Share on other sites
Aiman 86 Posted June 18, 2018 Well, still look good enough. xD, I'm about to receive the stands, table and screen next week, I'm already worried about those holes on the wall... Share this post Link to post Share on other sites
Brendon 146 Posted June 18, 2018 "For some reason" might want to 'invest' in  https://www.walmart.com/ip/Homax-Nail-Hole-Patch-Sapckle-White-5-3-oz/17300366?wmlspartner=wlpa&selectedSellerId=0&wl13=2598&adid=22222222227016744417&wl0=&wl1=g&wl2=c&wl3=80432605969&wl4=pla-177672085249&wl5=9032543&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=local&wl12=17300366&wl13=2598&veh=sem Share this post Link to post Share on other sites
Robert H 453 Posted June 30, 2018 Home Improvement: whiteboard installed on first attempt! Thanks @Carlos M. for the idea and inspiration! 2 2 Share this post Link to post Share on other sites
Robert H 453 Posted August 26, 2018 Got another monitor to balance out the setup. Not perfectly aligned, but I can live with it. Â 1 Share this post Link to post Share on other sites
JohnG 0 Posted September 20, 2018 Robert,  that looks great, I'm curious, what screen resolution are your monitors?  1680x1200?   etc? Share this post Link to post Share on other sites
Robert H 453 Posted September 20, 2018 @JohnGÂ The middle monitors are 3440x1440 and the sides are 2560x1080. Share this post Link to post Share on other sites
Jan R 4 Posted September 21, 2018 Great setup Robert! Four monitors without graphics card (only HD630 graphics)? How does this work? Share this post Link to post Share on other sites
Robert H 453 Posted September 21, 2018 @Jan R I've since upgraded PC's to the ASRock DeskMini GTX 1060. It supports 4 displays whereas my old DeskMini 110 was limited to 2 displays. Share this post Link to post Share on other sites
