Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation on 11/14/2020 in Posts

  1. 1 point
    I was getting burnt while taking the conventional ORBs at the open. It affected my pshychology when my first trade of the morning fails, even when I think the setup was perfect. For e.g, A beautiful strong 1min open candle on $TIGR below, with no wicks, I went Long and got stopped out. If my first trade fails then it becomes a catchup to overcome the losses and then achieve the daily goal, and my pshychology gets messedup. I found some ways to narrow the ORB setup down to a level which offers high accuracy and would like to share this strategy "Pullback ORB with Breakout Entry"|. I have tried this out for the last couple of months and it has worked very well so far. The reason for this setup: I wanted a high accuracy setup at the open. I don't like overtrading, I prefer one and done, if possible. I am time constrained during the day. I can trade only at the open for 30-40 mins. And I am not good at Trading reversals. About the setup: This Pullback ORB-Breakout Entry works very well with @WilliamH Harmonious Charts. Step 1: At the premarket, find a Harmonious setup, where the price action is above (or below) all the MAs on multiple timeframes 1, 2, 5, 15, 30, 60min and Daily (most of them, if not all). I prefer when the Harmonious chart is also ATH/ATL (All time High or Alltime Low) Step 2. Pullback candle: At the open, Watch the 1min chart for the first 2 mins. Check if the 2nd candle is a Pullback Candle. Then it is an Alert. E.g Below. Step 3: Breakout Entry: Wait for the 3rd candle to break the previous 2 candles high (only bodies, no wicks) and take an entry. E.g Below. Step 4. Profit Targets: This is usually high RR setups, some times as high as 3-4 RR and a good candidate for riding till close. Step 5. This pattern/Setup works as good when it occurs on 2min or 5min timeframes too. If step 2 doesn't occur on 1 min chart, switch to 2min chart and watch for the pullback candle on 2nd 2min candle. Continue Steps 2-4. If it doesn't occur on 2 min, switch to 5min chart and continue steps 2-4. P.S: Harmonious charts - Sometimes you may find higher timeframes as Harmonious and smaller timeframes not harmonious, Wait for the open to see if the price action becomes Harmonious on these smaller timeframes too. Contrary to other setups, this setup works well when it appears on smaller timeframes. Eventhough it may appear on 15 or 30 mins, the setup may not provide high RRs. These are not rare setups, they occur almost everyday on common stocks like $FB, $AMD, $MU, $UBER, $TSLA etc., At the open, I watch 6-7 stocks for this setup and switch from 1min to 2min and then to 5min. Please let me know if there are any questions.
  2. 1 point
    Hi I live in Tokyo Japan and I've been part of BBT for over a year now. Is anyone here living in Tokyo or planning on visiting interested in meeting up?
  3. 1 point
    Hi Mario, Falcon builds really quality systems, but they do come with a pretty high price tag. I am an IT consultant so naturally, I have the skills for this lol. I built my own machine with parts from my local computer store (Microcenter) for around $2,500. Mind you, I went completely overkill because my trading platform (Tradestation) is a real resource monster and you need to have some heavy processing power in order for it to run properly. DAS isn't as nearly intensive as TradeStation, but you do want to ensure you build something that won't become obsolete in the next 2 years. Especially with how frequently Microsoft is updating Windows 10, each update comes with a bit of a hit on certain areas of performance. Also just be mindful that the more monitors you wish to add, the more power you will need. Here's my system: 1x Intel i7 6800K CPU (processor) that is water-cooled and overclocked to 4.2 GHz. 32 GB's of high performance RAM 1x Samsung EVO 950 Pro (NVMe), 256B SSD (Solid State) - For Windows and applications 1x Crucial 525MX, 525GB SSD - For profile data and basic user data 1x Western Digital 3 TB 7200RPM Mechanical drive - for bulk data like image files 2x nVidia GTX 970 video cards 1x Corsair H110ti water cooler (for CPU) 1x Asus STRIX X99 Gaming motherboard 1x Corsair 750 Watt power supply 6x Acer 24" LED LCD monitors mounted on a HEX stand that is mounted to my desk 1x NEC monitor that is rotated for portrait mode and has the chatroom, Outlook and other apps on it 2x Dell keyboards. 1 keyboard is used for normal input, the second keyboard I used a free program called HIDMacros that allowed me to program any key to executed a macro or command. So the number pad on my second keyboard handles all of the order entry commands for my platform. Windows 7 Pro Remember, I went overboard because of my platform and since I am an IT guy, I figured "why the hell not?". Plus, it was a business write-off :) You will often find that "gaming" computers are best suited for day trading, but they sometimes have video cards that are complete overkill. As I mentioned above the specs of my machine, the more monitors you wish to have, the more video processing and hardware power you will need. MOST video cards can support up to 4 monitors on 1 card. If you want more than 1 monitor, than you will likely need 2 video cards. On-board video may be an option, but some manufactures will disable the on-board video if an add-on video card is detected. However, here's a breakdown of the BARE MINIMUM you need for a decent trading workstation: Processor (CPU): Minimum of an Intel Core i7 series processor. Most of these processors are fine and the latest generation (7th generation) is sufficient to handle the load. Ideally you want a processor with a higher clock speed (measured in GHz) as this will crunch numbers and data faster. Memory (RAM): NO less than 16GB's (Gigabytes) of memory. 32 is perfect, but 16 will do the job as well. The more memory you have, the more responsive programs are and the more space a program is given to store instructions that it needs quickly. Storage (Hard Drive Space): Hard Drive capacity is measured in Gigabytes and sometimes Terabytes depending on the type of drive. This isn't super important to your trading computer unless you plan on using your trading computer for other tasks, at which point, you will likely need more space. However, the most important take-away here is you want your primary hard drive (the "C-Drive" where Windows and your programs live) to be a Solid State Drive (SSD). These come in many forms, but the BEST option here is what is called an NVME drive. This type of drive plugs DIRECTLY into the motherboard. These are the fastest drives available now. The other type of solid state drive which is still a good option and good enough for trading is a regular 2.5" solid state drive that connects via a SATA data cable to a SATA port on your motherboard. This isn't as fast as the NVME drive you plug directly into your motherboard, but if you are on a budget it will suffice. The third and final type of drive to avoid unless you need a buttload of space is a standard 7200 RPM mechanical drive. These are the drives that have been around forever and the drives that moving parts (they have discs in them that spin around). These drives are slower and have a higher failure rate. Motherboard: The motherboard is the most important piece to the puzzle here since it connects all of the components and makes them "Talk" to each other. Naturally, you want a board that is compatible with your processor but also powerful enough and offers enough expansive capacity to ensure you will be able to add more memory (RAM), additional hard drives, and most importantly, additional video cards if needed. Once again, most of the gaming motherboards will fit the bill here. If you plan to have more than 3-4 monitors then you will need to ensure the motherboard you get has the ability to add another video card. You will want a board with at least 2x PCIe (PCI Express) x8 slots. Newer boards have x16 slots which is even better (the x8 or x16 signifies the speed at which the port can operate. Newer cards need the higher speed to operate more effectively, but this is more for gaming than trading). Also ensure the board offers gigabit LAN. This is a default on almost all boards nowadays, but I have seen a few lower-end boards that only offer 10/100 speed for the LAN (rather than 10/100/1000 or 'Gigabit'). Video Cards (GPU): I discussed this above with how many monitors you plan to add to your system. I prefer the NVidia cards as they are reasonably priced and they offer lots of power. You do not need the absolute latest $700 video card that has 5 GB's of RAM. This is total overkill (unless you plan to game). Any of the lower-end 10x series or even the higher numbered 9x series cards will do the job. Each of the video cards will be independent. Gamers tend to use what is called 'SLI' to make 2 cards act like one, but that is not the case here since we just need extra monitor space. Just be sure if you want more than one video card you see my notes on the motherboard above. Case: The case is something that you can have a little fun with. This is where all of the pieces of the computer live. People tend to get creative with these and get cases with windows and lights and all sorts of fancy stuff. This is entirely up to you. The most important take-away on the case is that it MUST support proper cooling. Most cases have 2x 80mm or 120mm fans in them. The more fans the more air is moving through the case to keep the internal components cool. If your goods overheat, then your machine will shut down and could potentially fry. So make sure you find a case with decent cooling capacity. Power Supply (PSU): The power supply or PSU is what provides power to all of the components. There are calculators out there that can help you determine based on what you plan to buy how large of a PSU you will need. My rule of thumb is do not go for anything less than 500 Watts. If you plan to have additional hard drives and video cards, then you will likely need a 750-1000 Watt PSU. Also, do not buy a cheap unit here. You want something that is robust and ideally, a modular power supply. These units provide the power to all of the components. If the PSU is providing crappy quality power, then you can expect crappy performance or fried components. Do not skimp on the power supply! Cooling: One final piece I am going to add here and it relates to everything else is that you need to ensure your system is properly cooled. A computer that is improperly cooled will perform poorly and you will end up replacing parts far sooner than you should. Proper cooling primarily comes from the case (discussed above), but other environmental factors such as location of the computer (is it near a heat vent, placed in a hot room, etc) will also affect the cooling. The processor is the most important component that needs to be cooled. Depending on which CPU you get, it will either come with a factory CPU cooler, or it won't come with anything. You DO NOT need to get a water-cooled system. This is ONLY for people like me who are a bit crazy and like to push their hardware to the absolute extreme. For day trading, a simple air cooler is more than enough for the processor. "Tower Coolers" as they are known do an incredible job of keeping the CPU nice and cool even under a heavy load. If you plan to go all out with high-end cards, a high-end CPU and you plan to game, day trade, edit videos and all sorts of stuff, then you will need liquid cooling. But the point of this thread is for a DAY TRADING system. so no overkill needed! I believe I about covered everything here. I probably made your head explode with even more questions, but that's what we are here for! I also apologize for the mess in my office in the pictures above. I need to re-organize my office at some point, but I had back surgery a few months ago, so moving anything is off the table for now. Although they do so that a disorganized desk is the sign of an intelligent mind.... Please feel free to ask any follow up questions. I didn't post links to specific hardware or websites since you can get this stuff from pretty much anywhere for very close to price. I have found that Microcenter is a lot cheaper than NewEgg and Amazon are. But if you don't have a Microcenter near you, you will have to order from elsewhere.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.